Our T.V or any other IR some time not working, how to check that? Remote Control send out infrared light signal. U can see signal light with your eyes.visible Mobile camera or camcorder.
Step 1
Turn on your Mobile Camera.
Step 2
Point the end of the remote with the IR emitter of the Mobile Camera.
Step 3
Press one of the buttons on the Remote.
Step 4
look at the mobile Display
Step 5
If the remote send a signal you should see a light in the Mobile
Display.
You can also test each of the buttons on the remote.Press them one at a time and check if you can light.Your not see IR Signal Light in Mobile phone Display. Remove the Battery and Press and Release each buttons you can see free stuck buttons.Reinsert the battery or use fresh battery on the remote and test the remote again.
Replace the remote if you Continue to see light even if you don't press any button.Make Sure to replace your remote with the same model.
Step 1
Step 2
Point the end of the remote with the IR emitter of the Mobile Camera.
Step 3
Press one of the buttons on the Remote.
Step 4
look at the mobile Display
Step 5
If the remote send a signal you should see a light in the Mobile
Display.
You can also test each of the buttons on the remote.Press them one at a time and check if you can light.Your not see IR Signal Light in Mobile phone Display. Remove the Battery and Press and Release each buttons you can see free stuck buttons.Reinsert the battery or use fresh battery on the remote and test the remote again.
Replace the remote if you Continue to see light even if you don't press any button.Make Sure to replace your remote with the same model.
No comments:
Post a Comment